-edible zone-
Doug's description:
".......I have attached pics of my
TD125 MKII with custom plinth constructed of 2 inch thick MDF, veneered
with Rosewood. It has moderate damping under the large platter and
silicon treatment underneath around the motor and several places on the
plinth's underside. In addition, a male IEC plug is installed at the
rear to accommodate different power cables. The arm is an SME 3009 II
improved with a Shure V15III cartridge.
The platter mat is
Herbie's "Way Better Turntable Mat" which I have found to be far
superior to the stock mat and another aftermarket mat I have tried. The
spikes are by FIM (First Impression Music). "
_______________________________________________________________horizontal rule
Thorens TD160 (mk 1) with custom plinth and Grace 707 tonearm. The armboard is custom built in accordance with the plans and example using phenolic and carbon fiber, developed by The Analog Dept. Cherry was used throughout including the motorboard top plate. An IEC male plug was installed at the rear for power cable options. The spikes are from ISOSpike.com